We were in an accident during an automated driving tech demo

As a transportation reporter, I’ve been in a lot of cars using either autonomous or semi-automated Advanced Driver Assistance (ADAS) features, both on public and private roads, and yet I’d never been in an accident during a demonstration drive for any of these features before now.

On Tuesday, January 30, myself and two TechCrunch video production staff were riding in a modified Hyundai Genesis equipped with technology created by autonomous systems startup Phantom AI, traveling south on Bayshore Freeway near Millbrae, CA.

In addition to the three TechCrunch staff, there were also two Phantom AI team members in the car, including founder and CEO Hyunggi Cho, and President and co-founder Chan Kyu Lee. Lee was at the wheel during the test, which was a demonstration of the startup’s Autopilot-like SAE Level 2 partial autonomous system, designed to maintain lane position, maintain distance between itself and vehicles ahead, and switch lanes automatically once directed using the turning indicator.

During the demonstration, while the L2 system was engaged and we were traveling at 60 MPH according to Phantom AI (though the human-machine interface in the video above shows 70 MPH as our set cruising speed), a pickup truck ahead dropped a poorly secured garbage bin from its cargo bed onto the roadway. The car in front, a white Nissan Rogue, applied the brakes to prevent hitting the trash bin, and our driver noticed the sudden stop and applied the brake in the Genesis with force to attempt to prevent a collision, but there was very little he could do at that stage and our car collided with the Nissan going approximately 20 MPH.

The Genesis suffered significant damage to the front end, as you can see above, though it was still technically drivable (but did begin leaking radiator fluid) and we first pulled to the shoulder as instructed by the California Highway Patrol, who were on the scene nearly immediately. We were then directed by the Patrol to a Chevron station just beyond a nearby exit, where we parked on the shoulder of a turnaround and gave our contact information to a patrolman, while the drivers involved provided full statements to the authorities.

Cho told us that the Automatic Emergency Braking system would’ve normally engaged at that point and prevented the collision, but it was disabled for the demo because it had been throwing too many false positives and was undergoing tuning. Lee’s manual disengagement, which resulted from pressing the brake pedal to the floor, as you can see in the video, didn’t occur fast enough for us to shed all our speed.

Cho immediately made sure no one was hurt (we weren’t, just shaken up) and after being cleared to leave the scene, we decided to follow through and move to an area of Foster City, where we rode in the startup’s Level 4 autonomous test car (a separate Genesis) around sparsely populated residential streets without incident. That may seem like an odd choice given we’d just experienced an accident riding in a car equipped with a different version of the company’s technology, but the follow-up demo was a separate system, speeds were much lower and there was a different safety driver at the wheel, and we were also honestly just all a little rattled and confused following the collision.

We provided Phantom AI with the opportunity to supply a full account of what occurred from their perspective, based on reviewing the data from the vehicle, and they supplied a breakdown of what occurred from their perspective, which you can read in full below. The video at the top of this article also documents the crash from within the vehicle, using a Rylo 360-degree camera. Footage was trimmed for length and exported to 1080P frames from a 4K 360-degree source automatically using Rylo’s software, and the license plate of the vehicle hit was obscured for privacy, but otherwise the footage is unedited.

CEO at Expert Software Development.

Help my clients open and win new B2C/B2B markets.

Provide custom Java and enterprise SAP Commerce (part of C4HANA suite) development, upgrade, and support.

Responsible for:

  • marketing and sales management;
  • product development;
  • distribution channel management;
  • marketing communications (including advertising and promotions);
  • pricing;
  • market research;
  • customer service;
  • digital transformation.